Blog

Renew Your SLD Slip Every 2 Years: A Guide | PasangSLD

Tour bus in a fleet due for SLD slip renewal every 2 years

The Slip Pengesahan Kefungsian SLD (SLD functionality verification slip) is valid for 2 years and must be renewed before it expires. To renew, the vehicle goes through re-verification at a JPJ-recognised workshop — the device is tested to confirm it still caps speed at 90 km/h with a warning at 85 km/h — and a new slip is issued for PUSPAKOM checks.

Updated: July 2026 · Official source: JPJ portal

Your SLD functionality verification slip is only valid for 2 years — after that it must be renewed through a fresh functionality test. Many owners focus on the installation and forget the slip has an expiry date that PUSPAKOM checks. Here's when to renew, the process, what gets inspected, and how to schedule renewals for your fleet.

1. Why Renewal Is Required Every 2 Years

Electronic devices and wiring in commercial vehicles are exposed to heat, vibration and wear — SLD function (90 km/h cap, 85 km/h warning, UN R89) can degrade without you noticing. Periodic verification keeps it working, and an expired slip can invite problems during PUSPAKOM inspection.

Takeaway: find your slip today and note the issue date — your renewal date is 2 years from there.

2. When Do You Need to Renew?

Go by each slip's own date, not the phase dates. Early Phase 1 verifications (Oct 2025) start reaching renewal from late 2027; Phase 2 (Jan 2026) follows in early 2028.

Safe practice: renew 1–2 months before expiry — a buffer for repairs or fully booked workshops, and you avoid turning up at PUSPAKOM with a dead slip.

Takeaway: record every vehicle's expiry date and set a reminder 60 days ahead.

Technician checking a speed limit device installation in a vehicle cabin

3. The Renewal Process: 5 Steps

1. Check your current slip's expiry date 2. Book an appointment with a JPJ-recognised workshop 3. Bring the vehicle, original slip and vehicle documents 4. Technician tests functionality — 90 km/h cap, 85 km/h warning 5. New slip issued, valid for another 2 years

Usually done in one visit if the device is in good condition.

Takeaway: not sure which workshops are recognised? WhatsApp us — we'll arrange a slot.

4. What Gets Checked During Re-Verification

— Speed limiting function: still capped at 90 km/h — Warning system active at 85 km/h — Condition of wiring and ECU connections — Calibration to UN R89 — No signs the device has been tampered with

Any failure? Repairs come first before the slip is renewed.

Takeaway: driver notices the vehicle can go past 90 km/h? That's an early warning sign — send it in for a check early, don't wait for the renewal session.

5. Cost & Fleet Scheduling

Renewal usually costs less than a full installation (installation market: advertised RM400–600, real quotes can reach RM1,700–2,500) — but repairs add cost, so ask for a written quote.

For fleets: — Central record: plate, slip date, expiry date, workshop — Send in batches of 2–3 vehicles a week — Align with PUSPAKOM inspection dates — Keep a 60-day buffer

Takeaway: WhatsApp us your vehicle list — we'll arrange a staggered verification schedule with JPJ-recognised workshops.

Summary — SLD Checklist

Locate every vehicle's SLD slip and note its expiry date.
Set a renewal reminder 60 days before the slip expires.
Test device function early — 90 km/h cap, 85 km/h warning.
Ask for a written quote before agreeing with any workshop.
Stagger fleet renewals — avoid sending all vehicles at once.
Align renewal dates with your PUSPAKOM inspection schedule.
WhatsApp PasangSLD to arrange re-verification slots with JPJ-recognised workshops.

FAQ

How long is the SLD functionality verification slip valid?+

The slip is valid for 2 years from the date of issue. After that, the vehicle must go through functionality re-verification at a JPJ-recognised workshop to get a new slip. The slip is checked during PUSPAKOM inspection.

What happens if my SLD slip expires?+

An expired slip can cause problems during PUSPAKOM inspection. Full Phase 3 enforcement is still in a grace period — JPJ has been issuing Section 114 investigation notices, not blanket summonses. For official penalty rates, check JPJ's official website.

Can I renew the SLD slip at any workshop?+

No — verification must be done through a JPJ-recognised workshop or supplier (the official list is on JPJ's website). PasangSLD is not on that list; we are the arranger who books your appointment with a recognised workshop.

How much does SLD slip renewal cost?+

There is no fixed rate — cost depends on the workshop, device type and whether repairs are needed. It is usually lower than a full installation. Ask for a written quote; PasangSLD can compare several recognised workshops for you.

Questions about SLD? Talk to us

WhatsApp us — we confirm your vehicle’s requirement & arrange installation with JPJ-recognised workshops.

WhatsApp us